Sunken Greenhouse: The First Reason We Put A Basement In Our Greenhouse Shed

I’ve always loved greenhouses, but the concept really doesn’t make sense the way it is usually practiced. If you have to heat the greenhouse all winter, and the greenhouse won’t hold heat because plastic and glass is a poor insulator then winter use is very impractical. If a greenhouse gets too hot to grow anything in the summer and you actually have to empty it out completely because it will actually cook the plants, then summer time becomes a headache also. As much as I like greenhouses for their architectural beauty, I had given up on building one myself.

Then I began reading about “Earth Ships” which is an interesting concept of digging a home right into the South-facing side of a hill and encasing the exposed side with a greenhouse. The Earth Ship requires an extreme life-style change however. This type of building requires living-breathing people inside nearly every day to keep the delicate ecology balanced. Although fascinating, there was no way I was going to convince my beloved city boy to live in a narrow green house basement. Looking through all the photos reminded me of the very attractive sunken greenhouses I had enjoyed while living in England. Almost every castle or historic manor estate you tour in England features a few garden innovations to fascinate and educate. My very favorite was a sunken very modern glass greenhouse just a few steps from a matching the newly built café on the grounds. I haven’t found my photos yet of that large glass structure with black metal framings, but the photo below will give you a good idea of the concept behind it.

The brick walled garden is as about as common in England as the basketball hoop is in America. The British have long known how the dark red bricks could capture what little sun they enjoy there and store the heat for later in the day, therefore creating little micro-climates in their backyards. The idea of building lean-to greenhouses against these walls instead of stand-alone greenhouses was the natural next step. Just one further innovation of digging down 2 or 3 or even 4 feet improved heat retention greatly with no real loss in available sunlight. Turns out this isn’t a British invention though.

In 1978 the first reported Chinese-style sunken greenhouse was built. The design uses three solid earthen walls and one south-facing glass wall. It’s use really took off in the 1980’s when plastic film became widely available and could affordably replace the heavy glass. The Chinese government created an initiative to encourage more development of the concept and have been using sunken greenhouses to feed their growing population. China’s goal was to have nearly 3.7 million acres of passive solar greenhouses by 2020. A simple hole is sufficient for some greenhouse experimenters, but better results can come from constructing the walls with rammed earth and brick that does a better job of storing heat for slow release later. I remember reading as a kid this classic book about building a very cheap underground house that was in the pile of Mother Earth News Magazines. A $50 house is a pretty exciting idea when you are 13 years old! Looking up that 1980’s book led me to discover this greenhouse version of the concept published in 2007. I was totally hooked, and became obsessed with the idea.

Another term for this project is the “Walipini” which has it’s roots in Pineapple growing techniques and a greenhouse building project in Bolivia. The Walipini is touted in articles such as “build this greenhouse for $300”. As appealing as that looks at first blush, I’ve already spent the better part of an Easter weekend bailing water out of the basement of my house flip. The open stairwell leading down into a pit with no central drain raised a lot of questions for me. In addition, most traditional greenhouses suffer from curious mice and other varmints looking for a warm winter home and a spot of food. Earthen walls and a roof of plastic film are no match for a 24/7 attack of little creatures. Instead the greenhouse is trimmed in metal and clear corrugated panels like these are used.

It was decided that instead of adding a little Walipini on the outside of the shed, that the shed would be expanded to have its own “built on” greenhouse. To prevent mice from building through the wall, the basement was extended as an addition. As in; instead of making the basement larger, we constructed a poured concrete wall between the shed construction and the greenhouse addition and only put a 36″ door way between the two. Each section has it’s own drain, but the likelihood of flooding is very low with a poured wall and solid concrete floor. The ideal depth for a Walipini is between 3 and 5 feet, but a standard basement depth is 8′ and trying to construct one part of the basement at a different depth would increase the complexity/cost of the build. Because the winter sun hangs so low at my latitude, any plantings will have to be raised at least 3 feet and would best be served at 5 feet during the late winter/early spring.

On 90 degree days in the summer the second floor of the greenhouse reaches 120 degrees! In the basement area of the greenhouse the temperature is usually 80-90 degrees, and the shed section of the basement ranges from 70-80 degrees. The summer, spring and fall work excellently in this greenhouse because the basement section does moderate extreme heat well, and lettuce continued to grow in 2020 well into fall and early winter. However, this design seems destined to fail as a winter green house. This very cold 2020-2021 winter found that inside temperatures were only about 5-10 degrees higher on cloudy days (and most winter days are cloudy here). Sunny days might see a bump of 15 degrees, but that heat quickly dissipates after the sun goes down. One reason the greenhouse isn’t holding heat is because of the walk-out basement door on the North side of the shed. This wall should have a large mass of backfill insulating it from the cold winds blowing off the bare corn-field, but instead much of the desired geo-thermal heat isn’t available because we weren’t able to completely finish the backfill project before the fill-dirt froze solid. Even with a perfect wall of backfill against that North wall, we would still constantly lose heat through the door though.

Sitting in the greenhouse this winter trying to figure out how to improve the winter usability factor highlighted how the ventilation is barely enough to keep pace during the summer, but is far too much in the winter. Sitting in the greenhouse on a particularly sunny and windy day, I could feel a draft. The first inch of snow on the ground reflected sunlight up under the floor joists and it was clear that the gap I was trying to cover to prevent mice from entering was also a factor in heat loss. I researched the dynamics of passive solar buildings and learned that the sun was heating up the air on the second floor, causing it to rise out the ridge vents at the roof top. This escape of heated air created a vacuum which drew in air from the very lowest levels. When a thick blanket of snow clogged all the air gaps around the foundation there was a noticeable change in the greenhouse climate. The greenhouse heated up and created the largest gap between interior and exterior temperatures it had seen all winter…almost 20 degrees. Covering the two floor drains also helped maintain that heat much longer after sundown than we had seen before. Ground pipes are often used in root cellars or greenhouse structures to pull in geo-thermally cooled or heated air…but in this case the short pipe is only pulling in air 18-inches under the surface of the ground and only 20 feet from the greenhouse. In winter it is really cold, in summer it is just a little cooler than the surrounding air. Covering both of these drains in the winter along with sealing the gaps around the foundation should create a better ‘air seal’ that so that heat rising to the roof ridge is held inside and can accumulate in the building by a vacuum. In other words, it will be less able to flow out the top while pulling cold air in through drains and gaps around the basement.

The summer plan is to install two vents in the upper-most peak of the greenhouse and perhaps also install a opening and screened window on the second floor. In the basement, both drains will be uncovered and the transom window over the basement walk-out will be unsealed, removing several layers of weatherization until only aluminum insect screening is left. This should purposely increase the amount of draft the green house can generate to pull heat out in the summer…but with designated windows and vents that can actually be controlled with insulated ‘shutters’ from the inside. This should make it much more pleasant inside the greenhouse for summer use.

Brass Egg™ participates in affiliate marketing programs, and may receive compensation when you click and purchase from links to retailers. Brass Egg™ of Russell Holdings Group, LLC 2021. All content ©2021 Russell Illinois Holdings, LLC. All Rights Reserved.

Erosion Problems: Can Willow Spiling Stop Erosion Sustainably and Long Term?

It sounds like a fairy-tale: Weave a living retaining wall that just gets stronger and stronger as the years pass and continue a tradition that is thousands of years old! Willow Spiling is a natural, sustainable, long-term solution to erosion. A perfect example of rediscovering an old practice for modern times.

This land bridge (huge culvert at the bottom of the ravine) was twice this width when we bought the property in 2014. We have debated and gotten multiple repair estimates and had pretty much resigned ourselves to losing this access point because all estimates were cost-prohibitive. I did find some useful ideas like this planter that I could DIY, but this erosion is past the point of even that helping. Willow Spiling is our last option, honestly our only hope at this point. In simplest terms, Willow Spiling is like weaving a basket along any area with erosion…..but every twig used in the basket is still alive with a root firmly anchored in the soil that continues to grow and get stronger over time instead of rotting and getting weaker.

Willow Spiling is simple and low cost, so for me, a great way to protect from erosion. The traditional technique weaves willow branches into a fence or wall and is currently one of the most popular methods for controlling erosion on slopes in China. We are going to take some time here and explore the history of using willow to control erosion, what specific types are best suited to various conditions, and how you can build them yourself.

History

The ancient Egyptians used willow as a natural remedy to stop bleeding, treat inflammation of the stomach and for urinary tract infections. But Willow also served the Egyptians by becoming the natural barriers they needed to fight erosion. In England you are likely to come across Wattle fences at historical sites which use dead wood as posts and dead branches as the weaving material into a huge “basket” that protects gardens, play areas or even as the structure for raised garden beds.

It has been used for centuries to provide shelter, create fish habitats and stabilize the soil on riverbanks. The history of willow spiling in the United Kingdom goes back to the late 1600s, when it was used as a river-bank erosion control method. There are currently a few British companies that can come to your property and install this “soft engineering” but that isn’t an option for us, so you can watch over my shoulder as I plan out this project.

The above hybrid of the wattle fence and the willow spiling is sometimes practiced. Here, two parallel rows of trees are closely planted and pruned in the copicing style so that strong trunks form as fence posts. After branch triming each year the branches are stacked between the trunks as a wall of brush. I like the concept, but the thick layer of brush might create unwanted wildlife habitat in your garden or back yard. Perhaps if the rows were placed closer together it might end up tidier.

Types

Willow (Salix) is an Old English word for a plant that has long, slender stems and branches. It was common to see willow trees by riversides because the wood of the tree easily bends under wind or water force. Willow is a tough, versatile tree with over 300 variaties, so I’m only going to touch on a very few.

The Weeping Willow may be the very first image that pops into your mind when ‘Willow’ is mentioned. The weeping variety grows up to 30 feet tall and has long drooping branches that create an arching canopy when in full bloom. The branches have an appearance of hair and grow best in moist soil with plenty of water. This tree is so distinct and iconic that it is good to imagine this version when you consider the process of weaving living branches into a basket/fence/net to catch soil that is eroding away. It’s easy to imagine those long thin branches being used in that that way. If you’ve ever taken care of a weeping willow then you know what it does to the lawn below it too. Not only the grass-killing shade, dodging the branches while trying to mow but also the constant limb/leaf litter. These drawbacks for lawn usage though are assets when trying to grab and rebuild soil that was lost to erosion.

The Pussy Willow is perhaps the second willow that would come to mind with it’s delicate white fluffy pods. The Pussy Willow is hardy for zones 4-8 and propagets as seeds but even more easily as cuttings. A versatile plant that can grow into a 20 foot tall tree or be trimmed into a small shrub that prefers very wet soil. This was my first impulse to purchase for my project, but it prefers full sun and can only tolerate some shade. In mid-summer my land bridge becomes deeply shaded, so I kept looking.

For my erosion problem, I purchased Salix Purpurea L. also known as Purpleosier Willow from Cold Stream Farm out of Minnesota. According to the US Department of Agriculture, this particular strain is best suited for protecting river banks and there is even a male clone ‘Streamco’ available that does not produce suckers to prevent invasive spread. We’ll see. Willows are known to hybridize on their own and add even more confusion to the already crowded 300 species World Wide. In a year I’ll publish an update on the seedling’s health and how well they are doing for this use.

How To Plant and Build

On their own, Willow trees naturally grow along river banks where their roots hold the soil in place during storms and high water flows. Just through nature, this provides stability for your river bank or ravine edge. It grows rapidly and is resistant to strong winds, heavy rain, and even droughts. All this while offering a wide range of benefits, including increased habitat and flood control. They can grow up to 6 feet in their first year, so periodic maintenance is very important (and encouraging) often in the first year. The plantings can be installed on slopes with any degree of incline and have even prevented landslides in some cases. The best time to plant is in late winter or early spring.

We take the natural benefits of the volunteer Willow a step further by ‘weaving’ the saplings into a living retaining wall while they are young and flexible. The best way to install willow spiling for long-term use is by burying it in the ground at least 2 inches below the surface. There are several techniques, one involves planting larger cuttings/seedlings of willow trees straight up from the ground and then weaving between these posts thin long saplings that have been planted at a tight angle (45 degree angle or even tighter).

Another technique is to use seedlings all of the same size and to plant one row at a 45 degree angle to the left followed by another row at a 45 degree angle pointed right. Weave both seedlings going both directions to each hold equal weight…no reliance on a ‘pole’ in the center. The basket above is offered as an example of how that would be constructed.

My ditch is so steep and the erosion is so aggressive, that I plan to experiment with a technique I haven’t heard anywhere. I plan to follow the first technique with an additional step to anchor the retaining wall. After planting the upright row in a straight line and another row at 45 degrees, I’ll then plant smaller willows horizontally straight into the steep ditch walls at staggered intervals. I will then tie these ‘horizontal willows’ to the upright willows with jute twine and begin their process of weaving into the basket fence. I hope over time these anchors will prevent the entire wall tipping over and into the creek.

I first became interested in how I could use my own forest twigs from reading this great book about using green wood to construct projects. The idea of using living saplings was fueled by this book though.

Brass Egg™ participates in affiliate marketing programs, and may receive compensation when you click and purchase from links to retailers. Brass Egg™ of Russell Holdings Group, LLC 2021. All content ©2021 Russell Illinois Holdings, LLC. All Rights Reserved.

How To Build A Retaining Wall That’s Flexible

I made lots of mistakes in planning the basement for my Greenhouse, and one of the first that I recognized was that I didn’t contract for the retaining wall. My concrete guy was so nice and accommodating and had already happily changed my door locations the night before the walls went up. I couldn’t bear to ask his help for this too.

I’d put a concrete pad in with a contractor friend and knew that this far North you have to dig at least 36″ deep to get below the frost line. The footings will actually heave out of the ground as the ground freezes and thaws if you don’t. However, I watched the entire process of basement construction, and they didn’t put footings in that deep during construction. Perhaps because the footings are nearly 8′ under the ground in almost all areas the few exposed areas are protected? I went with that theory and dug a modest hole for the footing to the west of the small concrete patio/pad.

I framed it out with some scrape 2×3, couple of screws and left-over wood stakes. The fall rains kept causing me problems and I had to use other left-over lumber to create a sort of ‘tiering’ on the slope to hold back the clay. Those same rains made it impossible for me to drive my mini-van back to this area (no truck at this point). When I researched my van’s hauling weight limit 400 pounds was the lucky number, so I never hauled more than 8 bags of Quick-Crete at a time over the rear axel. It was a brand-new van and on rainy days I would park at the highway and carry each bag to the construction site.

A make-shift water-catchment experiment saved me from having to haul in very much water to mix in with the Quick Crete.

Everything was mixed in a wheel barrow with a hoe and shoveled right into the hole. I finished the surface with a trowel I had gotten at a garage sale and broken broom head.

The idea was to install the this footing and extended ‘patio’ at about 1/4″ to 1/2″ lower than the original. This would allow water to drain from the professional patio so it would be less likely to get trapped and freeze or seep under the basement door. It also created a little lip that served to hold the cement blocks for the retaining wall in place.

There might be a day when a staircase is built on this North side of the Greenhouse. Maybe someday a goat shed will be added as a lean-to. I don’t know for sure, so dry-stacked cement blocks were chosen for this experiment.

Cement blocks now come in two shapes plus the ‘cap’ blocks that sit on top to finish it off. The regular block has concave ends on both sides. There is now a ‘end block’ that has a smooth end on one side and the other end is smooth with one channel. I haven’t messed with cement blocks in decades, so I don’t know when this became a thing, but it is a very nice cosmetic element when you are using them the way I am.

I had originally planned to use my retaining wall as a sort of staircase and it worked well in that way before I had built the stair case inside. However, after breaking my leg the summer of 2020 that idea is dead to me. Now the plan is build up the wall high enough that I can barely see over it. As the rain washes clay down onto the patio I can scrape it off with a flat-edge spade and toss it back up into the corner of the basement and cinder blocks. Continuing to back-fill so the earth can protect the basement from the winter cold.

My only block-wall experience was with the kid’s Legos, so all I knew was to the wall was to crisscross the cement blocks. My youngest recognized the pattern and said that’s what he does in Minecraft! This plan uses twice the cinder blocks you would normally need, but that made perfect sense when the wall would be used as a ‘staircase’. Now that I’ve decided that’s too dangerous, I appreciate that such a thick wall is not going to be pushed over easily. The blocks are less than $2 each, so it’s worth the ‘extra money’ to not have the wall tip over, and you buy yourself options when you have extra building supplies on hand.

As you can see here, the roof drip-line is 14 feet above the basement. The rain falls with such force that is has cut a straight channel in the heavy clay and the amount of water has built up and pushes the cement blocks in just this one year. All new blocks are added 1/4” in from the block below, but it won’t be long before I’ll have to remove the whole wall, dig some of the clay out and restack it again.

Overall, this setup works for the Greenhouse because it is flexible. We can restack the configuration if we decide to put a staircase or ‘deck’ of some sort on this side. We also could enclose this side and remove all this dirt and re-use the blocks. There are a ton of options!

Brass Egg™ participates in affiliate marketing programs, and may receive compensation when you click and purchase from links to retailers. Brass Egg™ of Russell Holdings Group, LLC 2021. All content ©2021 Russell Illinois Holdings, LLC. All Rights Reserved.